Monday, August 16, 2010

Airplanes Travelling Holiday






Airplanes Travelling Holiday

MHz is slowly giving way to the new GHz (gigahertz) system - 2.4GHz to be exact, Both the tx and rx need a matching crystal to function. The transmitter and receiver must be on the same frequency for them to work together, and the gadget that determines the frequency is called a crystal. All radio signals operate on a frequency, measured in megahertz (MHz*). Signals are generated whenever you move a stick or flick a switch on the tx, and are emitted via the antenna.

The radio signals are sent to the model in the same way as television and radio broadcasts are sent. The transmitter is the main box that you hold in your hands, the receiver is located inside the airplane and picks up the signals sent out from the transmitter. Radio control is the correct term because the airplane is controlled by radio signals that pass through the air from the transmitter (abbreviated to 'tx') to the receiver (abbreviated to 'rx'). You'll often see rc airplanes referred to asremote control, but technically this is an incorrect term. The letters rc stand for radio control.

Firstly, we should grab how it works. So get yourself comfortable, grab a drink and a snack and we'll begin! If you're thinking of learning to Fly RC Airplanes, the following will give you some fundamental information that you need to understand more about the hobby, with the added bonus of there not being an exam at the end! Flying RC airplanes as a leisure time hobby is prevailing all over the world.

No comments:

Post a Comment